Rinnai Infinity 26 Enviro 
At 26 litres a minute the Rinnai Infinity 26 Enviro is ideal for 2-3 bathroom homes. It is one of the most efficient heaters on the Australian market today.
Known as a condensing unit, the Rinnai Infinity 26 Enviro is basically a standard Rinnai Infinity 26 with an additional heat exchanger to extract that last bit of heat from the gas exhaust. This is used to preheat the incoming cold water and allows the unit to use roughly 10% less gas than a standard Infinity 26
7 Star equivalent rating
- Low running costs as with all continuous flow gas heaters and more importantly a lower environmental impact
- Inbuilt Energy Recovery System (Condensing Technology)
- Available only as 60C unit and requires a tempering valve for domestic use
- Low greenhouse gas emissions
- Full electronic control
- Compatible with all controllers
- Precise temperature control for safety and convenience
- Compact design allows installation flexibility
- Compatible with low flow rated shower fixtures (3 Star – 7.0 to 9.0 l/min)
3 Year parts and labour and 12 year warranty on heat exchanger
Specifications
| Dimensions (mm) : Height | 670 |
| Dimensions (mm) : Width | 470 |
| Dimensions (mm) : Depth | 283 |
| Colours | Titanium |
| Factory Default Temperature (Celsius) | 60 |
| Water Pressure (kPa) : Minimum | 220 |
| Water Pressure (kPa) : Maximum | 1000 |
| Gas Rate Min/Max (Mj/h) : NG | 10/172 |
| Flow Rate 25 Degrees C/Max : l/min | 26/35 |
| Star Rating | 7.0 (equivalent) |
| Connection Sizes Gas/Hot/Cold (mm) | 20/20/20 |
| Status Monitor | Yes |
| Dimensions (mm) : Height Inc Brackets | 722 |
| Dimensions (mm) : Hot Water Outlet (From Wall) | 115 |
| Dimensions (mm) : Hot Water Outlet (Left from Centre) | 100 |
| Dimensions (mm) : Cold Water Inlet (From Wall) | 75 |
| Dimensions (mm) : Cold Water Inlet (Right from Centre) | 13 |
| Dimensions (mm) : Gas Connection (From Wall) | 104 |
| Dimensions (mm) : Gas Connection (Right from Centre) | 103 |
| Dimensions (mm) : Condensate Outlet (From Wall) | 138 |
| Dimensions (mm) : Condensate Outlet (From Centre) | 195 |
| Dimensions (mm) : Gas Connection Length (From Base) | 40 |
| Dimensions (mm) : Cold Connection Length (From Base) | 50 |
| Dimensions (mm) : Condensate Connection (From Base) | 22 |
| Dimensions (mm) : Condensate Fitting Diameter | 15 |
| Weight (kg) | 29 |
| Hot Connection Length (from base) | 41 |